NEC IS016-5E Manuale Utente

Chapter 1    Installation Procedure 

 

To install ReplicationControl, follow the procedure below. 

(1)  Log on as the Administrator. 

(2)  Set the ReplicationControl installation media on CD-ROM drive and execute the following install 

program in the CD-ROM drive: 

 

\iSMRC\SETUP.EXE 

 

(3)  Follow the directions of the installer. 

The following software components are installed: 

• ReplicationControl 
•  Storage Manager Volume List 

 

 

To use the ReplicationControl, build the logical volumes to be operated on the disk array, set a pair 

of volumes under replication control, and then create a Volume List.    Use the iSMvollist command 

to create the Volume List. 

 

 

To use the ReplicationControl through the previously installed job scheduling software or Windows 

task scheduler, the services and systems need to restart for recognizing the path names of the 

installed execution files. 

 

 

To install and use both ReplicationControl and SnapControl on the same server, they must be of the 

same version. 

 

To uninstall ReplicationControl, follow the procedure below. 

(1)  Log on as the Administrator. 

(2)  Check whether the Storage Manager Volume List or ReplicationControl command is running and 

whether the Volume List Display screen is open. 

Terminate any running command and close any screen. 

(3)  Close [Event Viewer] if it is open.