Tyco Electronics M7100IP Manuale Utente

 

1.  Select the desired P25 system.  

2.  Select the Talk Group/Conventional Channel. (Selected simultaneously using either the 

system/group/channel knob or the group key.) 

3.  Press and hold the PTT. 

4.  When a grant tone is received (if enabled through programming), speak into the microphone. 

5.  Release PTT and wait for response. 

The radio will unmute according to the squelch mode defined in the radio personality (monitor, 
normal, selective). 

1.  Select the desired P25 system and Talk Group/Channel or turn scan on and make sure the 

desired channel is in the scan list. 

2.  When the radio receives a P25 call, the radio will unmute and the channel name will appear in 

the display. 

3.  Press the PTT button to respond. 

1.  Select the desired P25 system.  

2.  Select the radio unit to call (callee source ID) from the pre-programmed individual call list or 

enter the ID number on the radio keypad. 

3.  Press and hold the PTT. 

4.  When grant tone is received (if enabled through programming) speak into the microphone. 

5.  Release the PTT. 

The radio will unmute according to the squelch mode defined in the radio personality (monitor, 
normal, selective). 

1.  Select the desired P25 system and Talk Group/Channel or turn scan on and make sure the 

desired channel is in the scan list. 

2.  When the radio receives a P25 call, the radio will unmute and the ID of the transmitting radio 

will appear in the display. 

3.  Press the PTT button to respond. 

Unanswered calls will appear in the Who Has Called (WHC) list.