Tyco Electronics P5200 Manuale Utente

96 

1.  Press and hold the red Emergency/Home button (the length of time is programmable; check with the 

system administrator). 

2.  *TXEMER* flashes in the display, plus 

 and 

 will be displayed. After 2-3 seconds the transmit 

icon 

 turns off. 

3.  *TXEMER* and 

 remains until the emergency is cleared.  

4.  Press the PTT and 

 reappears. 

5.  Release PTT when the transmission is complete.  

1.  Press 

 button. 

2.  Within 1 second, press the Option button on the side of the radio. 

Transmit power adjustment is possible if enabled through programming. Within conventional systems, 
transmit power is adjustable on a per channel basis.  

There are two ways to toggle between high and low power: 

1.  Press 

. 

2.  Using the 

 or 

 keys, scroll until the cursor (>) appears to the left of “TX POWER” in the 

display. 

3.  Press 

 again to toggle between High and Low power. 

4.  “POWER = HIGH” or “POWER = LOW” will appear momentarily on the top line of the display. 

Press the Option button. “POWER = HIGH” or “POWER = LOW” will appear momentarily on the top 
line of the display. 

The Menu function accesses features that are not available directly from the keypad. The order and actual 
menu items available is configurable through programming. Upon radio power up, the menu item that is 
at the top of the menu list will always be displayed first. Subsequent access to the menu function will 
return the last menu item that was shown in the display and cursor position. 

1.  To enter the menu mode, press 

. 

2.  Upon entering the menu selection mode, Menu options will appear in the display (see Figure 10-6).