Turbosound LMS-D26 Manuale Utente

Do not work with enclosures with damaged paintwork especially for outdoor use. Due to the 
nature of modern touring these enclosures can be exposed to moisture. Untreated and 
exposed woodwork will absorb water. Aspect enclosures are screwed and glued together to 
prevent any serious structural damage due to water absorption. However increased exposure 
will cause the bond between wood and the paint to fail, at which stage it will be necessary to 
sand back the enclosure to bare wood and repaint to ensure long-term protection. 

There are three simple ways to help maintain the longevity of your Turbosound Aspect 890 
series enclosures: 

The majority of paintwork damage is mostly caused during transportation and flying of the 
systems. For large scale touring Turbosound recommends using the four-high WB-8904 and 
WB-8904T wheelboards and stabiliser trucks. This inherently protects the enclosures against 
impact protected by the feet, flying hardware and securing strap. 

Due to the weight of a fully loaded wheelboard it is essential that adequate protection is 
provided in the truck, BARS SHOULD BE USED TO ENSURE THE SYSTEM CANNOT MOVE 
DURING TRANSIT. 

Turbosound supplies heavy duty transit covers to help protect against long term damage 
during transit (see page 14). drawings are available from Turbosound which will enable you 
to have covers manufactured locally should you prefer.