Targus Mobile Docking Station Manuale Utente

12

To connect a serial mouse, attach the cable connector to 
the serial port on the docking station.

To connect a serial modem:

1 Attach the cable connector to the serial port on the 

docking station.

2 Install the modem software driver according to the 

instructions that come with the device.

3 When prompted to select the port, choose the Serial 

USB (COMx), where x is the COM port number 
assigned by your operating system.

1 Attach the cable connector to the serial port on the 

docking station.

2 Verify that the COM port setting, in either your 

HotSync

®

 or ActiveSync

®

 software, matches the setting 

on the docking station.

To verify the COM port setting on the docking station, 
refer to “Verifying Devices are Installed” on page 17. 

To verify the COM port setting on your PDA, refer to the 
documentation that came with it.

To connect an ethernet cable with RJ-45 connect, attach 
the cable connector to the ethernet/network port on the 
docking station. Additional procedures to connect to an 
actual network depend on the type of network you are