Targus Mobile Docking Station Manuale Utente

17

• Make sure that the device appears in Device Manager. 

For more information refer to “Verifying Devices are 
Installed” on page 17.

• Disconnect all devices from the docking station and 

reconnect them, one at a time. Check that each device 
works before plugging in the next one.

• Each USB port is equipped with over-current protection. 

Should  a  USB  device  draw  more  current  than  the  USB 
port can supply, the port will shut down. To re-enable the 
port, unplug the device and go to Device Manager or to 
the message in the system tray and choose the Reset
option. You can then plug the device back into the USB 
port. If a shut down reoccurs, check the power 
requirements of the device.

You can view the devices installed on the docking station 
from the Device Manager window in System Properties.

Right-click  My Computer,  Properties, then click the 
Hardware tab, and then the Device Manager button.

From the Device Manager window, expand the following:

• Display Adapters — displays Targus USB 2.0 VGA dock 

device

• Human Interface Devices — displays keyboards and 

pointing devices: mice, trackballs, and joysticks

• Network Adapters — displays ADM851X USB to fast 

ethernet adapter

• Ports (COM & LPT) — Serial on USB [COM x]

• Sound, Video and Game Controllers — displays USB 

audio device

• Universal Serial Bus controllers — displays the other 

devices installed for the docking station and generic hub.