Timex Nature Sounds Auto-Set CD Manuale Utente

Troubleshooting

PROBLEM

The alarm does not sound

The alarm sounds at an incorrect time

Buzzer alarm is heard when waking to CD

There is no display and the CD/radio will

not play

CD skips while playing

POSSIBLE CAUSE

• The alarm was not set correctly for AM/PM
• Alarm icons are not on the display

• Date or 7-5-2 settings programmed

incorrectly

• The wrong alarm icon was on the display
• The alarm was not set correctly for AM/PM

• A CD was not inserted into the CD player

• The CD was inserted incorrectly into the

player

• The CD Player door is not closed

• There was a power failure

• The unit is disconnected from an AC outlet
• The AC outlet has no power
• The AC outlet is controlled by a wall switch

that is off

• Dirty or defective disc

• Dirty lens

REMEDY

• Check the alarm time setting
• Press one of the Alarm Buttons so that

its Indicator appears on the display

• Check and reprogram settings

• Make sure the alarm you wish to wake to

is the only Alarm icon that appears on the

display

• When waking to CD, always make sure a

CD has been inserted

• Always insert the CD with the label surface

facing out

• Push the door gently until it is completely

closed

• All alarms default to buzzer during a power

failure as long as working batteries are

inserted correctly inside the battery

compartment

• Connect to an AC outlet
• Try the unit on another outlet
• Do not use an outlet that is controlled by

a wall switch

• Check the bottom of the disc and clean

if necessary with a soft cleaning cloth,

always wipe from the center out

• Clean with a commercial lens cleaner

If you have any questions, call SDI Technologies Inc. Timex Audio Products Division Customer Service, 1-800-888-4491.