Hollywood 24CX-2 Manuale Utente

Pagina di 23
© 2003 TDM Audio, Inc. 
Electronic Crossover Owner’s Manual 
Page 18 
TDM Option Cards 
he TDM 24CX series crossovers have internal connectors for option cards. A variety of 
different option cards is available from TDM. Plugging a card into the connector inserts the 
circuitry on the card between a crossover section output and the output of the unit. The most 
common card to use for this application is the high-pass filter card. This card is used on the low-
frequency section of the crossover to remove subsonic frequencies from the output. This helps 
remove stage rumble and wind noise, and also helps prevent speaker damage. Another popular 
option is the parametric equalizer card. Each card has two fully parametric equalizer bands that 
can be inserted on any crossover output. The cards are installed internally, so once they are set 
up, they are under the cover and their settings cannot easily be changed. This is an advantage in 
situations where you don’t want the settings changed, but it is an obvious disadvantage in cases 
where the settings will change often. In these situations, an external filter or equalizer is 
recommended. For information about all of the available option cards, contact your vendor or 
call TDM (see Contacting TDM). 
T