Whirlpool W10097001A-SP Manuale Utente

Remove door strike from dryer cabinet and set aside.

Take outer door and rotate in 180º and set it back down on 

inner door. Be certain to keep cardboard spacer centered 

between doors. Reattach outer door panel to inner door 

panel so handle is on the side where hinges were just 

removed. Insert 4 door screws.

Reattach door hinges to dryer door so that the larger hole is 

at the bottom of the hinge.

Flip door over so handle side is down. 

Remove screws at top, bottom, and side of door  

(4 screws). Keep door screws separate from hinge screws 

as they are diferent sizes. Holding door over towel on dryer, 

grasp sides of outer door and lift to separate it from inner 

door.  

noTE: Do not pry apart with putty knife or screwdriver.  

Do not pull on door seal or plastic door catches.