Whirlpool W10115229B-SP Manuale Utente

Place towel on top of dryer to avoid damaging the surface.

Open dryer door. Remove bottom screws from dryer cabinet 

side of hinges. Loosen (do not remove) top screws from dryer 

cabinet side of hinges.

Lift door until top screws in cabinet are in large part of hinge 

slot. Pull door forward off screws. Set door on top of dryer. 

Remove top screws from dryer cabinet.

Use a small, flat-blade screwdriver to gently remove 4 hinge 

hole plugs on left side of dryer cabinet. Insert plugs into hinge 

holes on opposite side of dryer cabinet.

NOTE: Two people maybe needed to reinstall door.
Insert screws into bottom holes on left side of dryer cabinet. 

Tighten screws halfway. Position door so large end of door 

hinge slot is over screws. Slide door up so screws are in 

bottom of slots. Tighten screws. Insert and tighten top 

screws in hinges.

Close door and check that door strike aligns with door  

catch. If needed, slide door catch left or right within slot  

to adjust alignment.