Lg Electronics MFL62512805 Manuale Utente

ENGLISH

Make sure it is seated evenly on the edge

of the inner door rim and resting flat on the

inside of the dryer.
NOTE: Be sure to remove the drying rack

after using the RACK DRY cycle.

To Install the Drying Rack

With the dryer door open, slide the rack into

the dryer drum.

CYCLE OPTION BUTTONS

Your dryer features several additional cycle

options to customize cycles to meet your

individual needs. Certain option buttons also

feature a special function that can be activated by

pressing and holding that option button

for 3 seconds.

To Add Cycle Options to a Cycle:

Turn on the dryer and turn the cycle selector

knob to select the desired cycle.

Use the cycle settings buttons to adjust the

settings for that cycle.

Press the cycle option button for the option

you would like to add. A confirmation

message will be shown in the display.

Press the START/PAUSE button to start the

cycle. The dryer will start automatically.

DAmP DRY BEEP

With this option, the dryer

will beep when the load is

approximately 80% dry. This

allows you to remove faster-

drying lightweight items or

items that you would like to

iron or hang while still slightly

damp.

WRINkLE CARE

Selecting this function will

tumble the load periodically

for up to 3 hours after the

selected cycle, or until the

door is opened. This is helpful

in preventing wrinkles when

you are unable to immediately remove items from

the dryer. Press and hold the DAMP DRY BEEP

button for 3 seconds to activate or deactivate the

WRINKLE CARE function.

CHILD LOCk

Use this option to prevent

unwanted use of the dryer or

to keep cycle settings from

being changed while the dryer

is operating. Press and hold the

EASY IRON button for 3 seconds

to activate or deactivate the CHILD LOCK function. The

lock icon will be shown in the display, and all controls are

disabled except the ON/OFF button.

NOTE: CHILD LOCK lasts after the end of cycle. If you

want to deactivate this function, Press and hold the EASY

IRON button for 3 seconds.

CUSTOm PROGRAm

To Save a Custom Program:

Turn on the dryer and turn the cycle selector

knob to select the desired cycle.
Use the cycle setting buttons to adjust the

settings for that cycle.
Press the cycle option button(s) for the option

you would like to add. A confirmation

message will be shown in the display.
Press and hold the CUSTOM PROGRAM

button for 3 seconds.

To Recall a Custom Program:

Turn on the dryer.

Press the CUSTOM PROGRAM button.

Press the START/PAUSE button to start

the cycle.

1
2
3

If you have a special

combination of settings that

you use frequently, you can

save these settings as a

CUSTOM PROGRAM.

NOTE: You may only save one custom program

at a time. Pressing and holding the CUSTOM

PROGRAM button will overwrite any previously

saved custom program.