Frigidaire 0804 Manuale Utente

 

 

Figure 1              

1.Open door and remove four (4) plugs in the door opening 
opposite the hinges. Retain all parts for uses later, unless 
otherwise noted. (Figure 1) Note: Use care in removing plugs 
in not scratching paint on the front panel. 
 

 

2. Begin removing the four (4) screws that attach the hinge to      
the front panel. (Figure 2) For best results, start by only 
removing one screw per hinge. Then only loosen the two 
remaining screws while firmly holding door to prevent damage 
to hinge, front panel or door. After the remaining screws are 
loosened, continue to remove all. 
 

         

 

3. Place door on a towel or pad handle side down to prevent 
any possible scratches to door. Remove all remaining four (4) 
screws between hinge and door. (Figure 3) 
 
4. Remove four (4) screws from side of door opposite of where 
hinge was mounted. 
 

 
  

     

 

                          

5. Remove two (2) door handle screws and two (2) hole plugs 
from door. Again taking care not to scratch paint on door. 
(Figure 4) 
 

 

6. Pull handle away from door assembley. (Figure 5) 
 

 

 Figure 6 

7. Separate the outer door from the inner door assembly with 
a putty knife or flat screw driver.  (Figure 6)