Electrolux 137018200 A Manuale Utente
24
3 Rotate and move trim ring cover plate to
opposite opening in trim and reinsert.
M) Reinstalling Trim Ring
1 Close door.
2 Orient trim so 12 position is approximately
2 Orient trim so 12 position is approximately
¾” to the left of top center. Opening in ring
should be on the hinge side.
should be on the hinge side.
3 Insert trim ring in slots and rotate clockwise
approximately ¾”.
N) Reinstalling Trim Plug
1 Open door to 90 degree angle.
2 Install trim plug with 1 long, course-thread,
2 Install trim plug with 1 long, course-thread,
panhead screw.
O) Plug in dryer and continue operation.
Reversing Door
L) Reversing Trim Ring
1 Trim ring orientation is marked on the back.
2 Remove trim ring cover plate. To remove
2 Remove trim ring cover plate. To remove
plate from left, pivot point is down. To
remove plate from right, pivot point is up.
remove plate from right, pivot point is up.
UP