Olympus TG-320 Manuale Utente
64 EN
Appendix
Appendix
Camera care
Exterior
Wipe gently with a soft cloth. If the camera is very dirty,
soak the cloth in mild soapy water and wring well. Wipe
the camera with the damp cloth and then dry it with a
dry cloth. If you have used the camera at the beach,
use a cloth soaked in clean water and wrung well.
If any dirt, dust, sand, or other foreign materials adhere
to the camera after use, wash the camera using the
method described on p. 69.
soak the cloth in mild soapy water and wring well. Wipe
the camera with the damp cloth and then dry it with a
dry cloth. If you have used the camera at the beach,
use a cloth soaked in clean water and wrung well.
If any dirt, dust, sand, or other foreign materials adhere
to the camera after use, wash the camera using the
method described on p. 69.
Monitor
Wipe gently with a soft cloth.
Lens
Blow dust off the lens with a commercial blower, then
wipe gently with a lens cleaner.
wipe gently with a lens cleaner.
Do not use strong solvents such as benzene or
alcohol, or chemically treated cloth.
Mold may form on the lens surface if the lens is left
dirty.
Battery/USB-AC adapter
Wipe gently with a soft, dry cloth.
Storage
When storing the camera for extended periods, remove
the battery, USB-AC adapter and card, and keep in a
cool, dry place that is well ventilated.
Periodically insert the battery and test the camera
functions.
the battery, USB-AC adapter and card, and keep in a
cool, dry place that is well ventilated.
Periodically insert the battery and test the camera
functions.
Avoid leaving the camera in places where chemical
products are handled since this may result in
corrosion.
corrosion.
•
•
•
•
•
•
•
Battery and USB-AC adapter
This camera uses one Olympus lithium ion battery
(LI-42B). No other type of batteries can be used.
(LI-42B). No other type of batteries can be used.
Caution:
There is a risk of explosion if the battery is replaced
with the incorrect battery type.
Dispose of the used battery following the instructions.
(p. 72)
with the incorrect battery type.
Dispose of the used battery following the instructions.
(p. 72)
Power consumption by the camera varies depending on
which functions are used.
During the conditions described below, power is
consumed continuously and the battery becomes
exhausted quickly.
which functions are used.
During the conditions described below, power is
consumed continuously and the battery becomes
exhausted quickly.
The zoom is used repeatedly.
The shutter button is pressed halfway repeatedly in
shooting mode, activating the auto focus.
A picture is displayed on the monitor for an extended
period of time.
The camera is connected to a printer.
The shutter button is pressed halfway repeatedly in
shooting mode, activating the auto focus.
A picture is displayed on the monitor for an extended
period of time.
The camera is connected to a printer.
Using an exhausted battery may cause the camera to
turn off without displaying the battery level warning.
The rechargeable battery is not fully charged at the
time of purchase. Before using the camera, charge it
by connecting it to a computer, or charge it using the
included USB-AC adapter (F-2AC) or charger (LI-41C).
When the included USB-AC adapter (F-2AC) is used,
charging usually takes approximately 3 hours (varies
on usage).
The included USB-AC adapter (F-2AC) is designed to
be used for charging. Images can be played back on
camera while charging. Make sure that shooting is not
being used while the USB-AC adapter is connected to
the camera.
The included USB-AC adapter (F-2AC) is designed to
be used only with this camera. Other cameras cannot
be charged with this USB-AC adapter.
Do not connect the included USB-AC adapter (F-2AC)
to equipment other than this camera.
turn off without displaying the battery level warning.
The rechargeable battery is not fully charged at the
time of purchase. Before using the camera, charge it
by connecting it to a computer, or charge it using the
included USB-AC adapter (F-2AC) or charger (LI-41C).
When the included USB-AC adapter (F-2AC) is used,
charging usually takes approximately 3 hours (varies
on usage).
The included USB-AC adapter (F-2AC) is designed to
be used for charging. Images can be played back on
camera while charging. Make sure that shooting is not
being used while the USB-AC adapter is connected to
the camera.
The included USB-AC adapter (F-2AC) is designed to
be used only with this camera. Other cameras cannot
be charged with this USB-AC adapter.
Do not connect the included USB-AC adapter (F-2AC)
to equipment other than this camera.
•
•
•
•
•
•
•
•
•
•
•
•
•
•