JVC GR-DVX709SH Manuale Utente

Master Page: Right

GR-DVX709SH_37-79.fm

Page 51

(

: Factory-preset)

During tape playback, the camcorder detects the sound mode in which the recording was made, and plays 
the sound back. Select the type of sound to accompany your playback picture. According to the menu access 
explanation on page 38, select “SOUND MODE” or “12BIT MODE” from the Menu Screen and set it to the 
desired parameter.
NOTES:

● The “SOUND MODE” setting is available for both 12-bit and 16-bit sound. (In previous models’ functions, 

● The camcorder cannot detect the sound mode in which the recording was made during fast-forward or 

Sound is output on both “L” and “R” channels in stereo.

 

Sound from the “L” channel is output in stereo.

Sound from the “R” channel is output in stereo.

Original and dubbed sounds are combined and output in stereo on 
both “L” and “R” channels in stereo.

Original sound is output on both “L” and “R” channels.

Dubbed sound is output on both “L” and “R” channels.

Refer to “For More Accurate Editing” (

墌 pg. 77).

Allows you to set the video recording mode (SP or LP) depending on 
your preference. It is recommended you use “REC MODE” in VIDEO 
Menu when using this camcorder as a recorder during digital dubbing. 
(

墌 pg. 64)

NOTE:
“REC MODE” can be set when the Power Switch is set to “P” or “M”.

Helps find a blank portion of tape when you want to record from the 
middle of a tape. (

墌 pg. 23)

Enables snapshots to be taken during video playback.

Enables dubbing of images recorded on a tape to a memory card. 
(

墌 pg. 65)

Enables audio/video signal output to a TV, VCR, etc. via the AV and S-
VIDEO connectors (

墌 pg. 24, 62).

Enables audio/video signal input from the AV and S-VIDEO connectors 
(

墌 pg. 62).

GR-DVX709SH_37-79.fm  Page 51  Wednesday, February 27, 2002  3:22 PM