JVC GR-DVX709SH Manuale Utente
62
EN
Master Page: Left-Heading0
GR-DVX709SH_37-79.fm
Page 62
DUBBING
*
Connect when an S-Video cable is not used.
** When connecting the cables, open these covers.
[To use this camcorder as a player]
1
Following the illustrations, connect the
camcorder and the VCR. Also refer to pages 24
and 25.
camcorder and the VCR. Also refer to pages 24
and 25.
2
Set the camcorder’s VIDEO/MEMORY Switch to
“VIDEO”. (GR-DVX709/509 only)
“VIDEO”. (GR-DVX709/509 only)
3
Set the camcorder’s Power Switch to “P”
while pressing down the Lock Button located on
the switch.
while pressing down the Lock Button located on
the switch.
4
Turn on the VCR’s power.
5
Insert the source cassette in the camcorder.
6
Insert the recording cassette in the VCR.
7
Engage the VCR’s AUX and Record-Pause modes.
● Refer to the instruction manual for the VCR.
8
Press 4/9 on the camcorder to start playback of
the source tape.
the source tape.
9
At the point you want to start dubbing, engage
the VCR’s Record mode.
the VCR’s Record mode.
10
To pause dubbing, engage the VCR’s Record-
Pause mode and press 4/9 on the camcorder.
11
Repeat steps 8 – 10 for additional editing. Stop
the VCR and camcorder.
NOTES:
● It is recommended to use the AC Adapter as the
power supply instead of the battery pack.
(
(
墌 pg. 11)
● As the camcorder starts to play your footage it will
appear on your TV. This will confirm the
connections and the AUX channel for dubbing
purposes.
connections and the AUX channel for dubbing
purposes.
● Before you start dubbing, make sure that the
indications do not appear on the connected TV. If
they do, they are being recorded onto the new
tape.
To choose whether or not the following displays
appear on the connected TV...
• Date/time
they do, they are being recorded onto the new
tape.
To choose whether or not the following displays
appear on the connected TV...
• Date/time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
(
(
墌 pg. 38, 49) Or, press DISPLAY on the remote
control to turn on/off the date indication.
• Time code
Set “TIME CODE” to “OFF” or “ON”.
(
(
墌 pg. 38, 49)
• Playback sound mode, tape speed and tape
running displays
Set “ON SCREEN” to “LCD” or “LCD/TV”.
(
Set “ON SCREEN” to “LCD” or “LCD/TV”.
(
墌 pg. 38, 49)
Dubbing To Or From A VCR
For GR-DVX709 Owners:
[To use this camcorder as a recorder]
1. Set the camcorder’s VIDEO/MEMORY Switch
to “VIDEO”, then set the camcorder’s Power
Switch to “P” while pressing down the Lock
Button located on the switch.
Switch to “P” while pressing down the Lock
Button located on the switch.
2. Set “S/AV INPUT” to “ON” and set “REC
MODE” to “SP” or “LP” (
墌 pg. 51).
3. Connect the cables as shown in the illustration
and load a cassette to record on.
4. Press the Recording Start/Stop button to engage
the Record-Pause mode. “
” appears on
the screen.
5. Press the Recording Start/Stop button to start
recording.
rotates.
6. Press the Recording Start/Stop button again to
engage the Record-Pause mode.
stops
rotating.
NOTES:
● After dubbing, set “S/AV INPUT” back to “OFF”.
● Analog signals can be converted to digital
signals with this procedure.
● It is also possible to dub from another
camcorder.
To S-VIDEO
S-Video cable
(optional)
To AV
Connector
Covers**
Covers**
Audio/Video cable
(provided)
To S-VIDEO IN
VCR
TV
To AUDIO,
VIDEO* IN
VIDEO* IN
AV. IN
GR-DVX709SH_37-79.fm Page 62 Wednesday, February 27, 2002 3:23 PM