Sakar 84379 Manuale Utente
10. Congratulations!! You have successfully installed the “PhoTags Express” software, the
“PhoTags WebCam Express” and the Camera driver.
SECTION TWO - TAKING PHOTOS
Please be sure that the batteries are functional prior to you using this camera to take digital photos.
If you want to take photos:
1. Press the Select button to open the camera and the LCD at the back of the camera will activate.
If you want to take photos:
1. Press the Select button to open the camera and the LCD at the back of the camera will activate.
The LCD display will show the status of resolution for 3 seconds and then show the number of
photos you can take before having to download them to your PC.
photos you can take before having to download them to your PC.
2. Find the image you would like to shoot and center the image in the viewfinder.
3. Hold the camera steadily, and press the shutter button to take photos (For optimum quality,
3. Hold the camera steadily, and press the shutter button to take photos (For optimum quality,
please make sure the subject is 5 feet from the camera lens.)
4. When you hear the buzzer beep once, (which indicates that you have already taken a photo), you
can Continue taking other photos;
5. When the digital camera is at full capacity, the LCD display will show "0” photos you can take.
Press the Shutter button once again and the buzzer will ring out twice. You cannot take any
photos at this time. Please download the photo to the PC. Alternatively, you can use the select
button to select "CL" (to delete all of the photos in the cameras memory) or " " (to delete the
last photo taken) in order to be able to continue using the camera.
photos at this time. Please download the photo to the PC. Alternatively, you can use the select
button to select "CL" (to delete all of the photos in the cameras memory) or " " (to delete the
last photo taken) in order to be able to continue using the camera.
Note:
When taking photos, the louder sound indicates a successful photo shot and a low
sounding beep will indicate the last photo taken was not taken properly. Indicate the last photo
taken was not taken properly.
taken was not taken properly.
Wake Up the Camera
If the digital camera is in the energy saving mode, please press Select button once to take the
camera out of energy saving mode to use the camera.
camera out of energy saving mode to use the camera.
Functions Shown on the LCD Display
Note:
When you open the camera, the LCD display will show the resolution status (Hi/Lo) for 3
seconds and then show out the rest of photos you may take.
Note:
If you do not press any button within 5 seconds when selecting the functions by Select
Button, the LCD display will jump back to the counter to advise you how many photos there are left
for you to take.
Press the Select button to select the functions of the digital camera. The function diagram will show
on the LCD display on the back of the digital camera As follows:
for you to take.
Press the Select button to select the functions of the digital camera. The function diagram will show
on the LCD display on the back of the digital camera As follows:
Power off the camera.
Auto shoot