RedMax TR2350S Manuale Utente
US-9
TR2350S
U
S
6. Set up
(1)
SE1
SE2
SE3
■ CONNECTING SWITCH WIRES
• Connect the switch wires between the
• Connect the switch wires between the
engine and the main unit. Pair the wires
of the same color.
of the same color.
■ INSTALLING HANDLE
• Mount the handle to the shaft tube and
• Mount the handle to the shaft tube and
clamp it at a location that is comfortable
to you. (SE1)
to you. (SE1)
(1) About 11 inches (28cm)
■ INSTALLING DEBRIS GUARD
• Put the debris guard on the gear box,
• Put the debris guard on the gear box,
attach it with the screws and hardware
provided. (SE2)
provided. (SE2)
■ INSTALLING CUTTING HEAD (SE3)
1. While locking the gear shaft, by
1. While locking the gear shaft, by
inserting the supplied tool into the
upper holder on the gear box, loosen
and remove the hexagon nut(left-
handed)
upper holder on the gear box, loosen
and remove the hexagon nut(left-
handed)
2. Fit the line head assembly to the gear
shaft over the holders. Hand-tighten it
securely.
securely.
You need not holder (B) and nut when
installing the cutting head.
installing the cutting head.
IMPORTANT