Kenwood TM-D700E Manuale Utente
8
1
ACCESSORY CONNECTIONS
■
External Speakers
If you plan to use external speakers, choose
speakers with an impedance of 8
speakers with an impedance of 8
Ω
. The external
speaker jacks accept a 3.5 mm (1/8") mono (2-
conductor) plug. Recommended speakers include
the SP-50B.
conductor) plug. Recommended speakers include
the SP-50B.
■
Microphone
To communicate in the voice modes, connect a 600
Ω
microphone equipped with an 8-pin modular plug into
the modular socket on the front of the main unit.
Press firmly on the plug until the locking tab clicks.
the modular socket on the front of the main unit.
Press firmly on the plug until the locking tab clicks.
For the U.S.A./ Canada version, a microphone hanger is
supplied. Attach the hanger to an appropriate position
using the screws included in the screw set.
supplied. Attach the hanger to an appropriate position
using the screws included in the screw set.
UP
DC 8 V, 200 mA max.
GND
STBY (PTT)
GND (MIC)
MIC
NC: No connection
DWN
DC 8 V, 200 mA max.
GND
STBY (PTT)
GND (MIC)
MIC
NC: No connection
DWN
Microphone
hanger
hanger
Microphone
hanger screw
(3 mm x 10 mm)
hanger screw
(3 mm x 10 mm)