Kenwood TM-D700E Manuale Utente
![Kenwood](https://files.manualsbrain.com/attachments/ac42daf651911f04136b4d8c05616678159c5c55/common/fit/150/50/30f9cfad5dc0dc630b5170bf40a934a632113bd8a7d6531073899a1c1c4c/brand_logo.png)
44
8
STORING IN PM CHANNELS
1 Confirm that the following conditions have been
satisfied:
•
The transceiver is in the receive mode.
•
Scan is not being used.
•
Microphone Control is OFF.
2 Configure the transceiver as you like.
•
For the items that can be stored, see page 42.
3 Press [F], [P.IN].
•
The PM channel numbers 1 to 5 appear and blink at the
bottom of the display.
bottom of the display.
4 Press [1] to [5] corresponding to the desired PM
channel.
•
The settings listed in page 42 are stored in the PM
channel.
channel.
RECALLING A PM CHANNEL
1 Press [PM].
•
The PM channel numbers 1 to 5 appear at the bottom of
the display.
the display.
2 Press [1] to
[5] corresponding to the desired PM
channel.
•
The contents of the selected channel are recalled.
•
The current PM channel number appears at the upper
right corner. “
right corner. “
s
” before “PM” indicates that Auto PM
Store mode {page 45} has been selected.
•
To exit PM Recall mode, press [PM], then press [OFF].
Note: You cannot recall a PM channel while transmitting.