Ricoh R10 Manuale Utente
166
C
h
a
n
gi
ng C
a
m
e
ra
Se
tti
tti
n
g
s
5
The following five operation sounds are made during camera
operation.
operation.
Note ----------------------------------------------------------------------------------------------
If you try to perform an operation that cannot be performed, the beep sound is emitted
regardless of the [Operation Sounds] setting.
regardless of the [Operation Sounds] setting.
1
Display the setup menu.
• For the operating procedure, see P.154.
2
Press the ADJ./OK button " to select [Operation
Sounds] and press the button $.
Sounds] and press the button $.
3
Press the button !" to select
the desired setting.
the desired setting.
4
Press the ADJ./OK button.
Changing the Operation Sound
Setting (Operation Sounds)
Start sound
: Sound when the camera is turned on.
Shutter release sound : Sound when the shutter release button is pressed.
Focus sound
Focus sound
: Sound when the shutter release button is half-pressed and the
camera focuses on the subject.
Beep sound
: Error sound indicating an operation that cannot be performed.
LevelSound
: When [Level Setting] is set to [Sound] or [Disp + Snd]
(GP.172), the sound is continually emitted at a set interval
when the camera is level in shooting mode.
when the camera is level in shooting mode.
Available Settings
Description
All *Default setting
All sounds on
LevelSound
Only the level sound is emitted.
Shutter
Only the shutter sound and level sound are emitted.