Sigma C72900 Manuale Utente

 

This function of the camera lets you take a sequence of pictures of 
the same subject at three different exposure levels; Appropriate 
Exposure, Under Exposure and Over Exposure. If it is difficult to 
determine the proper exposure, please use this function. 

 

 

 

1 

Press the 

 button.（The bracketing amount will change into 

the Allocate function guide. The 

 icon and the green 

bracketing amount will be displayed on the left corner on the 
LCD monitor. 

 

• It is not possible to set the Auto Bracketing mode if you pop-up the built-in flash. 

2 

Use the 

  buttons to set the bracketing amount. 

● 

It can be set in 1/3 stop increments up to ±3 

3 

Press the 

 button to apply the exposure. (The bracketing amount will 

change from green into white. The Allocate function guide will disappear.) 

 

„

 The camera will take three pictures in the following sequence; Appropriate 

exposure, under exposure and over exposure. 

„

 The exposure bracketing can be used with 4 different modes. 

P Mode ; Both shutter speed and aperture value will be changed. 
A Mode ; Only shutter speed will be changed.   
S Mode ; Only aperture value will be changed. 
M Mode ; Only shutter speed will be changed. 

 

• 

Three frames will be taken continuously by pressing the shutter button.   
When the Drive Mode is set to the Self Timer, only 1 frame will be taken 
each time the shutter button is pressed.