Sony DSC-F77A Manuale Utente

Pagina di 112
11
G
e
tti
n
g
 s
ta
rte
d
Using an external power source
,
Connect the AC-LM5 AC power 
adaptor (supplied) to the multi 
connector of the camera.
When placing the camera, make sure the 
LCD screen is facing up.
Remove the battery pack when using an 
external power source.
Connect the AC power adaptor to an easily 
accessible wall outlet (wall socket) close by. If 
some trouble occurs while using the adaptor, 
immediately shut off the power by 
disconnecting the plug from the wall outlet 
(wall socket).
1
AC power adaptor
Multi connector
v
 mark
,
Connect the power cord (mains 
lead) to the AC power adaptor 
and to a wall outlet (wall 
socket).
When you have finished using the AC power 
adaptor, disconnect it from the multi connector 
of the camera.
The set is not disconnected from the AC power 
source as long as it is connected to the wall 
outlet (wall socket), even if the unit itself has 
been turned off.
2
2
 To a wall outlet 
(wall socket)
Power cord 
(mains lead)
1
 
Using your camera 
abroad
Power sources
You can use your camera in any country or 
area with the supplied AC power adaptor 
within 100 V to 240 V AC, 50/60 Hz. Use a 
commercially available AC plug adaptor 
[a]
, if necessary, depending on the design of 
the wall outlet (wall socket) 
[b]
.
Do not use an electrical transformer (travel 
converter), as this may cause a malfunction.
AC-LM5