Toshiba T10 Manuale Utente

1

2

1

2

This camera uses two size AA batteries. Manganese batteries cannot be used.
Before loading the batteries, be sure to read “Notes on Batteries” on page 12.

• When an AC adapter is connected, check that the power is OFF.
• If batteries are loaded when the termination is not operated correctly, the

camera may not start up properly. Turn on the power again to resume
operation.

Slide the battery/SD card cover 1, and open it 2.

Close the battery/SD card cover 1, and slide it 2.
Make sure that the battery cover is firmly closed.

• Before you remove the batteries, be sure to turn the camera OFF. If the

battery is removed with the power ON, it may cause malfunction and damage
important data.

When the power is ON, the remaining battery power is displayed on the LCD monitor.

• When you use the camera for the first time or if you have left the camera for a

long time without the battery loaded, set the date and time (

➲ page 22).

Sufficient battery

power

Batteries

partially used

Battery power

nearing exhaustion

Batteries completely

exhausted