VistaQuest VQ3010 Manuale Utente

- 11 - 

 The Self – Timer delay is set to 10 seconds by default and it is   

enough to put your image in the picture. 

 
Using flash light 
When you take pictures at night, indoors, or in gloomy conditions, please use the flash. 
Press the 

 button (◄) repeatedly to scroll through the flash options. 

 the flash is off. (Default) 

 flash fires regardless of the ambient 

lighting conditions. 

 the camera detects ambient lighting conditions, 

and the flash fires if it detects insufficient light. 

Press the Shutter button to take pictures after the blink finishes. 
Note:

 1. Do not use flash while recording. 

2. Flash options revert to Off when VQ3010 is turned to off. 
3. Do not cover the flash while using it. 
4. The flash is deactivated when the camera is in          (Macro mode) and   

video mode. 

5. Do not do any operation while the flash is charging. 
 

Recording Video clips 
a. Turn the power on. 

b. The TFT will display image and symbols. 
c. Slide the Function switch to    (capture status). 

d. Press the 

►

button until     appears on the TFT. (Video Mode) 

e. Frame your subject through the TFT or viewfinder, and then press the Shutter button 

to start recording. 

f. Press the Shutter button again to stop recording. 
Note:

 Flash is deactivated in the video mode.