Toshiba IK-6410A Manuale Utente
- 9 -
6.
LENS
Back-Focus Adjusment
Back-Focus is adjusted at the factory to accommodate most standard lenses.
Sometimes, slight adjustment to the camera back-focus is
necessary.
Loosen the Focus Lock Screw. Achieve a clear image by
rotating the focus ring.
Tighten the Focus Lock Screw.
Sometimes, slight adjustment to the camera back-focus is
necessary.
Loosen the Focus Lock Screw. Achieve a clear image by
rotating the focus ring.
Tighten the Focus Lock Screw.
Auto-iris Lens
This camera supports two types of auto-iris lens: Video
and DC (direct drive) types. Connect the auto-iris
connector plug to the IRIS terminal on the side of the
camera. Refer to the chart below for correct wiring and
and DC (direct drive) types. Connect the auto-iris
connector plug to the IRIS terminal on the side of the
camera. Refer to the chart below for correct wiring and
Video IRIS
Direct Drive
Lens
IRIS Lens
1 +12V
Damp – (y)
2 NC
Damp + (
γ
)
3 VIDEO
Driver + (wh)
4 GND
Driver – (g)
IRIS Switch
VIDEO position
DC position
IRIS terminal
pin
pin
Focus Lock Screw
Focus ring
IRIS
Auto-iris lens
4
3
2
1
Camera Side
01_p2-p32
06.8.7, 11:08 AM
9