VistaQuest VQ350 Manuale Utente

 

US and Asia whereas 50Hz is most common  in UK, Japan, and Europe.  To change the 
frequency, turn on

 

VQ350.  Determine the desired frequency.  Press the Mode Button until 

“ 50 ” or “ 60 ” appears on the LCD display. Press the Shutter Button to change the 
frequency and select the one desired.   
 
13. Using the Flash – Automatic (SA), or On (SF) 
Press the Mode Button until SA/SF appears on the LCD display.    Press the Shutter Button 
to set the flash to automatic flash (Strobe Automatic) or forced flash (Strobe Forced).  In 
automatic mode, VQ350 will determine if the flash is needed or not.  In forced mode (also 
known as “fill- flash”) the flash will always fire, regardless of lighting conditions.   

14. Techniques for Capturing the Best Images 
The VQ350 captures images to record special memories and scenes you’ll want to share.  
Here are a few tips for getting the best possible images from your camera. 

1.  Use good lighting.  Give attention to your surroundings to insure your VQ350 can 

perform well with adequate existing lighting or use the flash to fill shadows or light dim 
areas.      

2.  Avoid uneven lighting and high contrast.  Compose your scenes so that there are no 

deep shadows or bright backgrounds.  The key to good images is balanced scene 
lighting.  Use the fill - flash for scenes where high contrast and dark shadows are 
unavoidable. 

3.  Minimum focus distance.    Make sure your subject is not too close.    The minimum focus 

distance is 3-4 feet (one meter). 

4. Position 

your 

primary subject in the center of the image.    The VQ350 focuses best in the 

center of the image.    The edges of your images are softly focused, giving a soft perimeter 
effect to each image.