Toshiba GSC-R30 Manuale Utente

48

The camera automatically controls the exposure (the combination of shutter speed and 
aperture size) to suit the photography conditions.

• In the interval between the 

 REC button being pressed down halfway and the 

focus being set, the LCD monitor image may turn dark.

• Flash charging may take a few seconds. During flash charging, the STATUS LED 

flashes orange and you cannot take the picture.

• When the subject is dark, you can fire the assist light for focusing by pressing the 

 REC button down halfway.

See “Setting the LEDs” 

 p.138.

• The assist light can be kept normally on by pressing the assist light button.

See “Photography Using the Assist Light” 

 p.66.

If the LCD monitor is too bright or too dark, adjust the monitor brightness.
See “Changing the LCD Brightness” 

 p.96.

Pressing the button down halfway automatically sets the 
focus and exposure. The ISO sensitivity, shutter speed 
and aperture are displayed at that point. Continue to 
press the button down fully to take the picture.
Note that camera movement when you press the shutter 
button down fully will cause blurring in the photographed 
image.
After shooting, the front LED lights.

When the still image size is set to [2M], pressing the 

 REC button down halfway 

widens the area that can be photographed and the screen display changes 
accordingly. When this occurs, the center of the image may shift. If you release the 

 REC button or press the button down fully to take the picture and then do not 

use the camera controls for around 3 seconds, the screen display reverts to its 
original area.