VistaQuest VQ 5020 Manuale Utente
- 16 -
• Using Slide Show
Use the Slide Show feature to sequentially display your pictures and videos on
the camera TFT, on a television screen, or on any external display device
equipped with a video input.
1. Make sure the
1. Make sure the
Function
switch is set to , and then press the
MENU
button.
2. Push the joystick up or down to select
[View]
on the screen and press the
joystick.
3. Push the joystick up or down to select
3. Push the joystick up or down to select
[Slide Show]
and then press the
joystick.
4. Each picture and video thumbnail is displayed once, in the order in which
you took them.
5. After slide show finished, It’s auto out of Slide Show function and then show
you took them.
5. After slide show finished, It’s auto out of Slide Show function and then show
last picture in playback mode.
Note: If you want to run the slide show on a television, connect the video cable
to the video-out port on the camera and the video-in port on the
television. Ensure that the Video Out setting is correctly set to NTSC or
PAL.
• Magnifying Pictures
Use the Magnify feature to zoom in to different areas of the picture.
1. Make sure the
1. Make sure the
Function
switch is set to .
2. Push the joystick up or down to select the picture you want to enlarge, and
then press the
MENU
button.