Toshiba IK-TF9C Manuale Utente
26
( 3 ) PW SNR (Pulse width trigger SYNC-NON RESET)
The trigger input to CC1 of the DIGITAL terminal develops 1 frame images.
(3. 1) Pulse Width Trigger SYNC-NON RESET Picture Output Timing
*1: Externally input signal
*2: Exposure time = Trigger pulse width + 6
µ
s
(Valid trigger pulse width is 2
µ
s or greater for external trigger shutter operation.)
*3: Video is output at the falling edge of the internal VD following completion of the exposure period.
The video and FVAL/LVAL/DVAL have a paired relationship.
Note:
When the next trigger is input before completion of the output of the video corresponding to the trig-
ger, there will be an effect on the video.
ger, there will be an effect on the video.
Exposure period*
2
Trigger*
1
Exposure period*
2
The internal VD falling edge is within the
exposure period and thus video is not output.*
exposure period and thus video is not output.*
3
Negative polarity mode
Positive polarity mode
About 7
µ
s
About 1
µ
s
(Internal VD)
RGB data
(video interval image)
FVAL
LVAL,
DVAL
DVAL
58H (Partial scanning OFF)
56H (Partial scanning 30fps)
78H (Partial scanning 40fps)
56H (Partial scanning 30fps)
78H (Partial scanning 40fps)