Toshiba IK-WB21A Manuale Utente

Tie the safety wire of the ceiling attachment onto
the safety hook of the camera.

Connect the AC adapter cable, LAN cable and other
cables to the terminals on the camera.

Hook

LAN cable

AC adapter cable

●

Check if the ceiling structure and material have a sufficient strength
before installing the camera onto a ceiling.  If the amounting strength is
inadequate, the camera will fall, potentially causing an injury or a camera
failure.  The wooden screws supplied as accessories do not provide an
adequate strength with some ceiling materials.  For example, special
anchors are needed if the ceiling material is gypsum boards.
Please consult the building architects regarding ceiling structure and
strength.

Some provided parts are required for installing the camera.

● When installing on ceiling

･ Ceiling attachment
･ Cover for mounting on ceiling

●

Improper installation may cause the camera to fall.

■ When installing on ceiling

Make a hole in the ceiling where the camera is to be
installed to insert the AC adapter cable, LAN cable
and other cables.

Feed the AC adapter cable, LAN cable and other
cables through the hole.

Mount the ceiling attachment below the drilled hole.

･ Mount on a ceiling or other structure by securely fastening the four

corners of the attachment by four wooden screws.

･ Install securely on the ceiling where the ceiling is supported by a

beam.

･ If a beam cannot be found, put a support behind the ceiling to

prevent falling of the camera.

･ Mount the camera with the lens pointing in the direction of the

arrow on the ceiling attachment.

Ceiling Attachment

Wood Screw

Groove for passing 
the AC adapter cable 
and LAN cable.

Anti-falling wire

Anti-falling stopper