Toshiba IK-WB21A Manuale Utente
59
Viewing
・
Listening
and Operation
Set up
Recording
Others
Introduction
58
Viewing
・
Listening
and Operation
Set up
Recording
Others
Introduction
Followings are the meaning of each part.
Recording Images on FTP Server (Cont.)
EX/MD
(keyword)
yyyymmdd
HHMMSS
***
ーー
A/B/C
"EX" indicates this is the file for Alarm In.
"MD" indicates this is the file for Motion Detection.
Enter user defined keyword.
Indicates date (Year, Month, Day).
(e.g. January 1, 2004 → 2004 01 01)
(e.g. January 1, 2004 → 2004 01 01)
Indicates time (Hour, Minute, Second).
(e.g. 23:59:00 → 23 59 00).
Time is displayed in 24-hour time display.
(e.g. 23:59:00 → 23 59 00).
Time is displayed in 24-hour time display.
If the camera records more than one image at the same
period, the order is indicated with 3-digit number. The bigger
the number, the newer (latest) the image.
period, the order is indicated with 3-digit number. The bigger
the number, the newer (latest) the image.
Indicates total number of generated alarm(s). when the
number reaches to 99, it returns to 00 and starts adding
again. Reset to "00" also when the power is turned off.
number reaches to 99, it returns to 00 and starts adding
again. Reset to "00" also when the power is turned off.
A: Pre-Alarm Recording images.
B: Image when alarm has generated.
C: Post-Alarm Recording.
B: Image when alarm has generated.
C: Post-Alarm Recording.
5) Entering Server path
･ Set a server path for recording of files. Ask your FTP server
administrator if you have a question.
■ Recording by alarm
(Displayed if "Alarm Recording" is chosen as an FTP record
conditions.)
conditions.)
Set if recording by Alarm In/Motion Detection is desired.
･ To detect external alarms or motion, set to enable "Alarm In" or "Motion
Detection" in alarm setting (see page 73).
1) Setting number of pre-Recording
･ Choose the number of images
0, 3, 5 or 10 images
2) Setting number of post-Recording
･ Choose the number of images
0, 3, 5, 10, 20, 60 or 120 images
NOTE
●
The number of recorded images may be decreased depending on the network
condition, recording interval or other factor.
condition, recording interval or other factor.
3) Setting a "Recording Cycle"
･ Recording at a rate of one images per set time (seconds).
･ Chose a time to set.
･ Chose a time to set.
1/30, 1/15, 1/10, 1/5, 1/3 1/2, 1, 2, 3, 5, 10, 30, 60, 120 or
180 second
180 second
NOTE
●
The cycle may shift depending on image size and networking conditions.
4) Enter "Record File Name"
･ Enter characters (no more than 16 characters) in the part
described as (keyword).
File name will be shown like this:
File name will be shown like this:
e.g. EX (Keyword) yyyy mm dd HH MM SS ***N--A.JPG
NOTE
●
You cannot use these characters: \ / : ; , | ? * < > ‘ "