Toshiba IK-WB21A Manuale Utente

3000322
3000323
3000341
3000342
3000343
3000344
2000345
2000346

 apim> Called wblistnormal.cgi.
 apim> Called wblistextcontrol.cgi.
 apim> Called wbstoragestatus.cgi.
 apim> Called wbstoragemount.cgi.
 apim> Called wbstoragemountstatus.cgi.
 apim> Called wbstorageformat.cgi.
 apim> Called wbsetadminsetdefault.cgi.
 apim> Called wbsetadmincamreboot.cgi.

API wblistnormal.cgi was booted.
API wblistextcontrol.cgi was booted.
API wbstragestatus.cgi was booted.
API wbstragemount.cgi was booted.
API wbstragemountstatus.cgi was booted.
API wbstrageformat.cgi was booted.
API wbsetadmininsetdefault.cgi was booted.
API wbsetadmincamreboot.cgi was booted.

There is no IP address of 
your network camera on 
The Camera Finder’s 
Network Camera List.
(Part 1)

Cannot display a browser 
from Camera Finder.

The message, "The page 
cannot be displayed," 
shows up, and cannot 
login to the camera even 
if you start Camera 
Finder.

Cannot login to the 
camera even though 
entering the IP address of 
the camera   directly to 
the browser, and "The 
page cannot be displayed" 
shows up. 

●Camera is not 

powered on.

●LAN cable is not 

connected.

●LAN cable is not 

connected to the PC.

●IP address of the PC 

is not configured. 

●Installed directory of 

browser is wrong.

●The IP addresses of 

the camera and your 
PC are wrong. 

●Proxy server has 

been set in the 
browser settings.

●Turn on the power.

●Connect the LAN cable of the 

camera to a hub or router in the 
right way.

●Be sure to turn on the power of 

the hub and router.

●Connect the LAN cable to the PC 

in the right way. 

●Configure the IP address of your 

PC correctly. (→ Basic User's 
Guide page 27) 

●Assign the directory where you are 

going to install the browser. Start 
Camera Finder and go to "View"/ 
"Customize"/"Browser Selection."

●Set the correct IP address of the 

network camera.

●Set the correct IP address of your 

PC.

●When proxy is set to the browser, 

sometimes you may not able to 
login. Add Camera's IP address to 
bypass proxy server.

Symptom

Cause

How to Manage

This is the same cause as "The message ,"The page cannot be 
displayed," shows up, and cannot login to the camera even if 
you start Camera finder. 
Please see "Cause" and "How to Manage" above.