Panasonic DMCGH3K Manuale Utente

44

Preparation

•

Some functions cannot be used depending on the mode or displayed screen.

•

When [One Push AE] is assigned, the Exposure meter is displayed. The aperture and the 
shutter speed are adjusted automatically to suitable levels when the Exposure setting is too 
dark or too bright.
In the following cases, suitable exposure cannot be set. (Exposure meter is displayed)

–

When the subject is extremely dark and it is not possible to achieve adequate exposure by 
changing the aperture value or shutter speed

–

When recording using the flash

–

In Preview Mode 

–

When using a lens that includes an aperture ring

•

When set to [Focus Area Set], it is possible to display the position setting screen of either AF 
area or MF Assist.

•

When [1 Shot RAW+JPG] is set, it will record the RAW file and a fine JPEG image 
simultaneously once only. It will return to original quality after recording.

•

When [1 Shot Spot Metering] is set, it will record with [Metering Mode] set to [

] (spot) once 

only. It will return to original Metering Mode after recording.

•

Operations of the cursor button, [MENU/SET], and the control dial are disabled when [Cursor 
Button Lock] is set. Press the function button again to enable them.

•

When [Restore to Default] is set, function button settings return to the default configuration.

•

[Fn1] cannot be used during Time Lapse Shooting.

•

[Fn4] cannot be used in Intelligent Auto (

 or 

) Mode and Creative Control Mode.

•

[Fn6] and [Fn7] cannot be used when the viewfinder is in use.

∫

Touching [Fn] on the on-monitor recording information screen 

 also allows you to 

display the screen in step

.

∫

[Fn6] and [Fn7] are used by touching function buttons.
1 Touch [ ].

2 Touch [Fn6] or [Fn7].

•

The assigned function will operate.

Fn6

Fn7