Panasonic VQT0Y69 Manuale Utente
Advanced
42
VQT0Y69
• The available flash range is an
approximation.
• Refer to P72 for the ISO sensitivity.
• Refer to P26 for the focus range.
• If ISO sensitivity is set to [AUTO] or
• Refer to P26 for the focus range.
• If ISO sensitivity is set to [AUTO] or
[
] (DMC-FX07) when using the flash,
it will be automatically increased to a
maximum of [ISO400].
maximum of [ISO400].
• To avoid noise, we recommend
decreasing the ISO sensitivity (P72) or
setting [PICT.ADJ.] to [NATURAL]. (P78)
setting [PICT.ADJ.] to [NATURAL]. (P78)
• If you take a picture with the flash at close
range when the zoom is near [W] (1
k),
the edges of the recorded picture may
become dark. Rotate the zoom lever
slightly and then take the picture.
become dark. Rotate the zoom lever
slightly and then take the picture.
∫ Shutter speed for each flash setting
¢5 The shutter speed changes depending
on the slow shutter setting. (P77)
• There may be differences in the above
shutter speeds in scene mode.
– [NIGHT SCENERY] (P51):
– [NIGHT SCENERY] (P51):
8 seconds to 1/2000th of a second
– [FIREWORKS] (P53):
1/4th of a second, 2 seconds
(DMC-FX07)/1 second (DMC-FX3)
(DMC-FX07)/1 second (DMC-FX3)
– [STARRY SKY] (P54):
15 seconds, 30 seconds, 60 seconds
• Do not look directly at the flash at
close range when it is activated.
• If you bring the flash too close to an
object, the object may be distorted or
discolored by the heat or lighting from
the flash.
discolored by the heat or lighting from
the flash.
• Do not cover the photo flash with your
fingers or other objects.
• In economy mode, the LCD monitor
turns off and the status indicator lights
while the flash is charging. [This does
not happen when using the AC adaptor
(DMW-AC5; optional).] If the remaining
battery power is low, the length of time
that the LCD monitor turns off to
charge may become longer.
while the flash is charging. [This does
not happen when using the AC adaptor
(DMW-AC5; optional).] If the remaining
battery power is low, the length of time
that the LCD monitor turns off to
charge may become longer.
• If you press the shutter button halfway
when the flash is activated, the flash icon
turns red.
turns red.
• When the jitter alert appears, we
recommend using a tripod.
• When you take a picture beyond the
available flash range, the exposure may
not be adjusted properly and the picture
may become bright or dark.
not be adjusted properly and the picture
may become bright or dark.
• When the flash is being charged, the flash
icon blinks red, and you cannot take a
picture even when you press the shutter
button fully.
picture even when you press the shutter
button fully.
• When taking a picture with the flash, the
white balance is automatically adjusted
(except for [
(except for [
]). However, the white
balance may not be properly adjusted if
the flash level is insufficient. (P70)
the flash level is insufficient. (P70)
• When the shutter speed is fast, the flash
effect may not be sufficient.
• If you repeat taking a picture, it may not
actually be taken even if the flash is
activated. Take a picture after the access
indication disappears.
activated. Take a picture after the access
indication disappears.
• The red-eye reduction effect differs
between people. Also, if the subject was
far away from the camera or was not
looking at the first flash, the effect may not
be evident.
far away from the camera or was not
looking at the first flash, the effect may not
be evident.
• When you set burst mode or auto bracket,
only 1 picture is recorded for every flash
activated.
activated.
Flash setting
Shutter speed
(Sec.)
: AUTO
1/30 to 1/2000
: AUTO/
Red-eye
reduction
reduction
: Forced ON
: Forced ON/
: Forced ON/
Red-eye
reduction
reduction
: Slow sync./
Red-eye
reduction
reduction
1/8
¢5
to 1/2000
: Forced OFF
VQT0Y69ENG.book 42 ページ ２００６年６月３０日 金曜日 午前１１時７分