Panasonic VQT0Y69 Manuale Utente

93

VQT0Y69

∫ Conditions under which a different 

In the following cases, the picture is not 
recorded in the same folder as the 
previously recorded picture. It is recorded 
in a folder with a new number. 
1 When the folder just recorded to contains 

a picture file with the number 999 in it 
(example: P1000999.JPG).

2 When the card just recorded to contains, 

for example, a folder with the number 
100 [100_PANA] in it and that card is 
removed and replaced with a card that 
has a folder with the number 100 in it 
recorded by a camera from a different 
maker (100XXXXX, with XXXXX being 
the name of the maker) and then a 
picture is recorded.

3 When recording after selecting 

[NO.RESET] (P22) from the [SETUP] 
menu. (Pictures will be recorded to a 
new folder with a number sequential to 
the folder recorded to immediately 
before. By using [NO.RESET] on a card 
that does not contain folders or pictures, 
such as one just formatted, the folder 
number can be reset to 100.)

∫ PictBridge (PTP) setting
Even if you set [USB MODE] to 
[PictBridge (PTP)], you can connect to your 
PC if the OS is “Windows XP” or “Mac OS 
X”.
• Pictures can only be read on the camera. 

They cannot be written to a card or 
deleted.

• When there are 1000 or more pictures on 

a card, the pictures may not be imported.

• Do not use any other USB connection 

cables except the supplied one.

• Do not disconnect the USB connection 

cable while [ACCESS] is displayed.

• When there are many pictures on the 

card, it may take some time to transfer 
them.

• You may not be able to play back motion 

pictures on the card correctly when the 
camera is connected to a PC. Import the 
motion picture files to the PC and then 
play them back.

• If battery power is exhausted while the 

camera and the PC are communicating, 
the recorded data may be damaged. 
When you connect the camera to the PC, 
use a battery with sufficient battery power 
(P13) or the AC adaptor (DMW-AC5; 
optional).

• If the remaining battery power becomes 

low while the camera and the PC are 
communicating, the status indicator blinks 
and the alarm beeps. In this case, stop 
the communication at once on the PC.

• Pictures edited or rotated with a PC may 

be displayed in black in playback mode 
(P33), multi playback (P65) and calendar 
playback (P66).

• For information about this, refer to the 

separate operating instructions for PC 
connection.

• Read the operating instructions for the 

PC.

• If a card is not inserted when the camera 

is connected to the PC, you can edit or 
access the pictures on the built-in 
memory. If a card is inserted, you can edit 
or access the pictures on it. (DMC-FX3)

• You cannot switch between the built-in 

memory and the card while the camera is 
connected to the PC. When you want to 
switch between the built-in memory and 
the card, disconnect the USB connection 
cable, insert (or remove) the card and 
then connect the USB connection cable to 
the PC again. (DMC-FX3)

VQT0Y69ENG.book  93 ページ  ２００６年６月３０日　金曜日　午前１１時７分