Panasonic DMC-LZ7 Manuale Utente
Preparation
17
VQT1C39
Setting Date/Time
(Clock Set)
(Clock Set)
∫ Initial setting
The clock is not set, so the following screen
appears when you turn the camera on.
The clock is not set, so the following screen
appears when you turn the camera on.
A: [MENU/SET] button
B: Cursor buttons
B: Cursor buttons
1 Press [MENU/SET].
2 Press
3/4/2/1 to select the
date and time.
A: Time at the home area
B: Time at the travel destination (P57)
•
B: Time at the travel destination (P57)
•
2/1: Select the desired item.
•
3/4: Set the display order for the date
and time.
•
: Cancel without setting the clock.
3 Press [MENU/SET] to set.
• Turn the camera off after setting the
clock. Then set the mode dial to a
recording mode to turn the camera on
and check whether or not the clock
setting is correct.
recording mode to turn the camera on
and check whether or not the clock
setting is correct.
∫ Changing the clock setting
1 Press [MENU/SET].
2 Press
1 Press [MENU/SET].
2 Press
3/4 to select [CLOCK SET].
(P67)
3 Press
1 and then perform steps
2
and
3
to set the clock.
4 Press [MENU/SET] to close the menu.
• You can also set the clock in the
[SETUP] menu. (P20)
• When batteries have been inserted for
more than 3 hours, the clock setting is
stored in the camera for approximately
3 months even if the batteries are
removed.
stored in the camera for approximately
3 months even if the batteries are
removed.
• You can set the year from 2000 to 2099.
The 24-hour system is used.
• If the clock is not set, the correct date
cannot be printed when you stamp the
date on the pictures with [DATE STAMP]
(P76) or order a photo studio to print the
pictures. (P79)
date on the pictures with [DATE STAMP]
(P76) or order a photo studio to print the
pictures. (P79)
PLEASE SET THE CLOCK
CLOCK SET
MENU
M/D/Y
JAN
1
1 2007
.
.
0
0 00
:
CLOCK SET
SELECT
SET
EXIT
MENU
:
:
:
CANCEL
VQT1C39ENG.book 17 ページ 2006年12月21日 木曜日 午前10時57分