Panasonic DMC-LS2 Manuale Utente

Pagina di 104
Connecting to other equipment
81
VQT0V10
Playing Back Pictures 
on a TV Screen
∫ Playing back pictures using the video 
cable (supplied)
• Turn the camera and the TV off.
1 Connect the video cable A 
(supplied) to the [V.OUT] socket 
on the camera.
• Connect the video cable with the [
mark facing the [
1] mark on the 
[V.OUT] socket.
• Hold the video cable at 
B and insert 
straight in or take straight out.
2 Connect the video cable to the 
video input socket on the TV.
1 Yellow: to the video input socket
3 Turn the TV on and select external 
input.
4 Turn the camera on.
• Do not use any other video cables except 
the supplied one.
• The top and bottom or left and right of the 
picture may be cut off slightly when it is 
displayed due to the characteristics of the 
TV.
• Depending on the screen mode setting of 
the TV when you connect the camera to a 
wide-screen TV or a high-definition TV, 
the picture may be stretched horizontally 
or vertically and the top and bottom and or 
left and right of the picture may be cut off 
when it is displayed. In this case, change 
the screen mode setting.
• Read the operating instructions for the TV.
• When you play back a picture vertically, it 
may be blurry.
• You can view pictures on TVs in other 
countries (regions) which use the NTSC 
or PAL system when you set 
[VIDEO OUT] in the [SETUP] menu. Even 
if you set [VIDEO OUT] to [PAL], the 
output signal will still be NTSC in the 
recording mode.
∫ Playing back pictures on a TV with an 
SD Memory Card slot
Still pictures recorded on an SD Memory 
Card can be played back on a TV with an 
SD Memory Card slot.
• Depending on the TV model, pictures may 
not be displayed on the full screen.
• Motion pictures cannot be played back. To 
play back motion pictures, connect the 
camera to the TV with the video cable 
(supplied).
• You may not be able to play back 
MultiMediaCards.
DIGITAL
V.OUT
DC IN
3V
VQT0V10ENG.book  81 ページ  2005年12月27日 火曜日 午後8時34分