Panasonic DMC-TZ10 Manuale Utente
26
VQT2R48
VQT2R48
27
For details about the setting procedure in the [SETUP] menu (→20)
Using the [SETUP] menu
(Continued)
[RESET]
Reset to the default
settings.
settings.
[RESET REC. SETTINGS?]
[YES]/[NO]
[YES]/[NO]
[RESET SETUP PARAMETERS?]
[YES]/[NO]
[YES]/[NO]
• Information registered in [FACE RECOG.] is reset if
recording settings are reset.
• Resetting the setup parameters will also reset the
following.
Age in years/months and names in [BABY] and [PET]
Scene Modes, any settings in the [TRAVEL MODE]
menu (including GPS function)
Age in years/months and names in [BABY] and [PET]
Scene Modes, any settings in the [TRAVEL MODE]
menu (including GPS function)
, [FAVORITE] in
the [PLAYBACK] menu (set to [OFF]), [ROTATE DISP.]
(set to [ON])
(set to [ON])
• Folder numbers and Clock settings will not be reset.
• Camera movement may be audible as the lens function
is reset. This is not a fault.
[USB MODE]
Select communication
method for when
connecting camera to a
computer or printer with
USB connection cable.
method for when
connecting camera to a
computer or printer with
USB connection cable.
[SELECT ON CONNECTION]:
Select [PC] or [PictBridge (PTP)] each time you connect to
a computer or PictBridge-compatible printer.
a computer or PictBridge-compatible printer.
[PictBridge (PTP)]: Select when connecting to a
PictBridge-compatible printer.
[PC]: Select when connecting to a computer.
[VIDEO OUT]
Change the video output
format when connected
to a TV, etc. (Playback
Mode only).
format when connected
to a TV, etc. (Playback
Mode only).
[NTSC]/[PAL]
If the default setting is changed, AVCHD Lite motion
pictures may not be played correctly.
If the default setting is changed, AVCHD Lite motion
pictures may not be played correctly.
• Operates when AV cable is connected.
[TV ASPECT]
Change the aspect ratio
when connected to a
TV, etc. (Playback Mode
only).
when connected to a
TV, etc. (Playback Mode
only).
/
• Operates when AV cable is connected.
Item
Settings, notes
For details about the setting procedure in the [SETUP] menu (→20)
[HDMI MODE]
Set the output resolution
when connected to a
high-definition TV with
an HDMI mini cable
(optional). (→148)
when connected to a
high-definition TV with
an HDMI mini cable
(optional). (→148)
[AUTO]: The output resolution is automatically determined
based on information from the connected TV.
[1080i]: Outputs 1080 effective scanning lines in interlaced
format.
[720p]: Outputs 720 effective scanning lines in
progressive format.
[576p]∗
1
/[480p]∗
2
: Outputs 576 (or 480) effective scanning
lines in progressive format.
Interlaced and Progressive Formats
In ‘i’ = interlaced format (interlaced scanning), half of
the effective scanning lines are displayed alternately
every 1/50∗
In ‘i’ = interlaced format (interlaced scanning), half of
the effective scanning lines are displayed alternately
every 1/50∗
1
(1/60∗
2
) second. In ‘p’ = progressive format
(progressive scanning), high-density video signals are sent
simultaneously for all effective scanning lines every 1/50∗
simultaneously for all effective scanning lines every 1/50∗
1
(1/60∗
2
) second.
The HDMI socket of this camera supports [1080i] high
definition video output.
To enjoy progressive video or high definition video, a TV
compatible with these formats is required.
definition video output.
To enjoy progressive video or high definition video, a TV
compatible with these formats is required.
∗
1
When the video out is
set to [PAL]
∗
2
When the video out is
set to [NTSC]
• Even if [1080i] is set, the motion picture is output at 720p
during playback.
• If no video appears on the TV even though [AUTO] is
set, try switching to [1080i], [720p], or [576p]∗
1
([480p]∗
2
)
to adjust to a video format that can be displayed on your
TV. (See the manual for your TV.)
TV. (See the manual for your TV.)
• This is activated when an HDMI mini cable (optional) is
connected.
• For further details (→148)
[VIERA Link]
Enable automatic linking
with other VIERA Link-
compatible devices, and
operability with a VIERA
remote control when
connecting via an HDMI
mini cable (optional)
(→149).
with other VIERA Link-
compatible devices, and
operability with a VIERA
remote control when
connecting via an HDMI
mini cable (optional)
(→149).
[OFF]: Operations must be performed via the camera’s
own buttons.
[ON]: Operations may be performed via the remote
control of the VIERA Link-compatible device.
(Not all operations will be available.) Operability of
the camera’s own buttons will be limited.
(Not all operations will be available.) Operability of
the camera’s own buttons will be limited.
• Works when connected via an HDMI mini cable
(optional).
Item
Settings, notes
The [HDMI MODE], [VIERA Link] menu items are not available in the DMC-TZ8/DMC-ZS5.