Panasonic DMC-TZ10 Manuale Utente

Pagina di 178
28   
VQT2R48
VQT2R48
   29
For details about the setting procedure in the [SETUP] menu (→20)
 Using the [SETUP] menu
 
(Continued)
Item
Settings, notes
[VERSION DISP.]
Check the version of the 
camera firmware.
Current version is displayed.
 
[FORMAT]
Use when [BUILT-IN 
MEMORY ERROR] 
or [MEMORY CARD 
ERROR] appears, or 
when formatting the built-
in memory or card. 
When a card/built-in 
memory is formatted, 
the data cannot be 
restored. Check the 
content of the card/
built-in memory 
carefully before 
formatting.
[YES]/[NO]
 
• This requires a sufficiently charged battery (→11), or an 
AC adaptor (optional) and DC coupler (optional). When 
formatting the built-in memory, remove the cards.
(Only inserted card will be formatted if present; built-in 
memory will be formatted if no card is inserted.)
 
• Always format cards with this camera.
 
• All picture data including protected pictures will be 
deleted. (→135)
 
• Do not turn off power or perform other operations during 
formatting.
 
• Formatting the built-in memory may take several 
minutes.
 
• Consult your nearest Service Centre if format cannot be 
successfully completed.
 
[LANGUAGE]
Change display 
language.
Set the language displayed on the screen.
For details about the setting procedure in the [SETUP] menu (→20)
 
 [DEMO MODE]
View demonstration of 
functions.
[STABILIZER DEMO.]: (Only during recording)
Extent of jitter is shown on graph (estimate) 
Large ← Small → Large
Extent of jitter 
Extent of jitter after correction 
 
• During demo screen display, the Optical Image Stabilizer 
switches ON and OFF every time [MENU/SET] is 
pressed. 
 
• Cannot display during Playback Mode.
 
• To stop→ Press the [DISPLAY] button.
 
• Recording and zoom cannot be performed during demo.
[AUTO DEMO]: View introductory Slide Show
[OFF]/[ON]
 
• To close → Press [MENU/SET] 
 
• When a card is not inserted, Automatic Demo Mode 
will start if there is no operation for about two minutes 
with the power ON when connected to the AC adaptor 
(optional) and DC coupler (optional).
 
• [AUTO DEMO] cannot be displayed on external devices 
such as TVs.
Item
Settings, notes