Panasonic DMC LX 3 Guida Utente
VQT1T27
52
Advanced (Recording pictures)
∫ Operate with the joystick
Tilt the joystick toward
2 to select [È], and then move
3/4 to compensate the exposure.
A Exposure compensation value
•
Select [È] only to return to the original exposure (0 EV).
•
Press the shutter button halfway to finish.
Note
•
EV is an abbreviation of [Exposure Value]. It refers to the amount of light given to the CCD by
the aperture value and the shutter speed.
the aperture value and the shutter speed.
•
The exposure compensation value appears on the lower left of the screen.
•
The set exposure value is memorized even if the camera is turned off.
•
The compensation range of the exposure will be limited depending on the brightness of the
subject.
subject.
[REC] mode:
Taking Pictures using Auto Bracket/Multi Aspect
In this mode, 3 pictures are automatically recorded in the selected exposure
compensation range each time the shutter button is pressed. You can select the picture
with the desired exposure from the 3 pictures with different exposures.
compensation range each time the shutter button is pressed. You can select the picture
with the desired exposure from the 3 pictures with different exposures.
With auto bracket
d1 EV
Press
3 [È] until [EXPOSURE] appears,
compensate the exposure with
2/1.
•
Select [0 EV] to return to the original exposure.
Press [MENU/SET] to finish.
•
You can also press the shutter button halfway to finish.
Auto Bracket
1st picture
2nd picture
3rd picture
d0 EV
j1 EV
i1 EV
1
2
A
P.PC_DMC-LX3_eng.book 52 ページ 2008年7月8日 火曜日 午後10時13分