Panasonic DMC-FP8 Manuale Utente
13
(ENG) VQT2G37
Preparation
Setting Date/Time (Clock Set)
•
The clock is not set when the camera is shipped.
Press [MENU/SET].
Press
2/1 to select the items (year, month,
day, hour, minute, display sequence or time
display format), and press
display format), and press
3/4 to set.
‚: Cancel without setting the clock.
Press [MENU/SET] to set.
•
After completing the clock settings, turn the camera off. Then turn the camera back on,
switch to Recording Mode, and check that the display reflects the settings that were
performed.
switch to Recording Mode, and check that the display reflects the settings that were
performed.
•
When [MENU/SET] has been pressed to complete the settings without the clock having
been set, set the clock correctly by following the
been set, set the clock correctly by following the
“
Changing the clock setting
”
procedure
below.
Select [CLOCK SET] in the [REC] or [SETUP] menu, and press
1.
•
It can be changed in steps
3
and
4
to set the clock.
•
The clock setting is maintained for 3 months using the built-in clock battery even
without the battery. (Leave the charged battery in the unit for 24 hours to charge the
built-in battery.)
without the battery. (Leave the charged battery in the unit for 24 hours to charge the
built-in battery.)
Turn the camera on.
•
The [PLEASE SET THE CLOCK] message appears.
(This message does not appear in [PLAYBACK]
Mode.)
(This message does not appear in [PLAYBACK]
Mode.)
A [MENU/SET] button
B Cursor buttons
B Cursor buttons
Changing the clock setting
ON
OFF
DMC-FP8~_eng.book 13 ページ ２００９年７月６日 月曜日 午前１１時２８分