Panasonic DMC-FZ50 Manuale Utente

114

VQT0X92

3 When recording after selecting 

[NO.RESET] (P29) from the [SETUP] 
menu. (Pictures will be recorded to a 
new folder with a number sequential to 
the folder recorded to immediately 
before. By using [NO.RESET] on a card 
that does not contain folders or pictures, 
such as one just formatted, the folder 
number can be reset to 100.)

w PictBridge (PTP) setting
Even if you set [USB MODE] to 
[PictBridge (PTP)], you can connect to your 
PC if the OS is “Windows XP” or “Mac OS 
X”.
• Pictures can only be read on the camera. 

They cannot be written to a card or 
deleted.

• When there are 1000 or more pictures on 

a card, the pictures may not be imported.

• Do not use any other USB connection 

cables except the supplied one.

• Do not disconnect the USB connection 

cable while [ACCESS] is displayed.

• When there are many pictures on the 

card, it may take some time to transfer 
them.

• You may not be able to play back motion 

pictures on the card correctly when the 
camera is connected to a PC. Import the 
motion picture files to the PC and then 
play them back.

• If battery power is exhausted while the 

camera and the PC are communicating, 
the recorded data may be damaged. 
When you connect the camera to the PC, 
use a battery with sufficient battery power 
(P16) or the AC adaptor (DMW-AC7; 
optional).

• If the remaining battery power becomes 

low while the camera and the PC are 
communicating, the power indicator blinks 
and the alarm beeps. In this case, stop 
the communication at once on the PC.

• Pictures edited or rotated with a PC may 

be displayed in black in playback mode 
(P40), multi playback (P78) and calendar 
playback (P79).

• For information about this, refer to the 

separate operating instructions for PC 
connection.

• Read the operating instructions for the 

PC.