Panasonic AW-PH400 Manuale Utente
Pan/Tilt Control Panel AW-RP400
AW-RP400
29
Menu settings
$
List of menu items and settings
PRIORITY
MASTER, SLAVE
MASTER
DIRECTION
PAN
TILT
ZOOM
NORMAL, REVERSE
NORMAL
FOCUS
IRIS
ROTATION
TILT RANGE
190°, 300°
190°
SPEED WITH ZOOM POS.
OFF, 1, 2, 3
OFF
MEMORY LENGTH
60s, 120s, 300s, 600s
60s
PRESET SPEED
1 to 25
25
IRIS CONTROL
BOTH, RP400, CB400
BOTH
ROTATION SWITCH
ROTATION, FOCUS, ZOOM, IRIS
ROTATION
OPTION SWITCH
A
B
C
D
NOT USE, DEF, WIP, HEATER/FAN,
NOT USE
E
LAMP, OPTION, ND, EXT, AF
F
G
H
CONTROL SELECT MODE
INTERLOCK, UN-INTERLOCK
INTERLOCK
BUZZER
OFF, ON
ON
AUTO RUN
START No.
1 to 50
1
END No.
1 to 50
50
INTERVAL
1s to 30s
1s
OPERATE
STOP, RUN
STOP
SD CARD
STORE, LOAD
– – –
Menu item
Setting
Description
Initial value
PRIORITY (MASTER/SLAVE)
When two AW-RP400 pan/tilt control panels have been connected, the priority of the CONTROL SELECT buttons is to be
set.
When MASTER is selected as the setting, the master AW-RP400 has priority; when SLAVE is selected, the slave AW-RP400
has priority.
If the AW-RP400 control panel with a high priority has selected the pan/tilt heads, which were selected by the AW-RP400
control panel with a low priority, the CONTROL SELECT button lamps on the AW-RP400 control panel with the low priority
start flashing to indicate that the control rights have been ceded to the other control panel. This setting is performed using the
master AW-RP400 control panel.
set.
When MASTER is selected as the setting, the master AW-RP400 has priority; when SLAVE is selected, the slave AW-RP400
has priority.
If the AW-RP400 control panel with a high priority has selected the pan/tilt heads, which were selected by the AW-RP400
control panel with a low priority, the CONTROL SELECT button lamps on the AW-RP400 control panel with the low priority
start flashing to indicate that the control rights have been ceded to the other control panel. This setting is performed using the
master AW-RP400 control panel.