Nikon D7100 Body Manuale Utente

Pagina di 384
329
n
Photos are out of focus
:
• Rotate focus-mode selector to AF (0 71).
• Camera unable to focus using autofocus: use manual focus or focus lock (0 76, 78).
• The shutter-release button can not be used to focus when AF-ON is assigned as the Press 
option for Custom Setting f2 (Assign Fn button, 0 253), f3 (Assign preview button
0 255), f4 (Assign AE-L/AF-L button, 0 256), or f9 (Assign MB-D15 4 button, 0 259). Use 
the button to which AF-ON is assigned.
Focus does not lock when shutter-release button is pressed halfway
: Use A AE-L/AF-L button to lock focus 
when AF-C is selected for autofocus mode or when photographing moving subjects in AF-A 
mode.
Can not select focus point
:
• Unlock focus selector lock (0 75).
• Auto-area AF or face-priority AF selected for AF-area mode: choose another mode.
• Camera is in playback mode (0 185) or menus are in use (0 217).
• Press shutter-release button halfway to turn monitor off or start standby timer (0 38).
Can not select AF-area mode
: Manual focus selected (78, 159).
Only one shot taken each time shutter-release button is pressed in continuous release mode
: Continuous 
shooting is not available if built-in flash fires (0 121).
Image size can not be changed
Image quality set to NEF (RAW) (0 67).
Camera is slow to record photos
: Turn long exposure noise reduction off (0 228).
Noise (bright spots, randomly-spaced bright pixels, fog, or lines) appear in photos
:
• Choose lower ISO sensitivity or use high ISO noise reduction (0 79, 228).
• Shutter speed is slower than 1 s: use long exposure noise reduction (0 228).
• Turn Active D-Lighting off to avoid heightening the effects of noise (0 113).
AF-assist illuminator does not light
:
• AF-assist lamp does not light if AF-C is selected for autofocus mode (0 71) or if continuous-
servo autofocus is selected when the camera is in AF-A mode. Choose AF-S. If single-point or 
dynamic-area AF is selected for AF-area mode, select center focus point (0 73, 75).
• The camera is currently in live view or a movie is being recorded.
• Off selected for Custom Setting a7 (Built-in AF-assist illuminator) (0 233).
• Illuminator has turned off automatically. Illuminator may become hot with continued use; 
wait for lamp to cool down.
Smudges appear in photographs
: Clean front and rear lens elements. If problem persists, perform 
image sensor cleaning (0 313).
Sound is not recorded with movies
Microphone off is selected for Movie settings Microphone.
The brightness of the image in the monitor differs from the exposure of photographs taken in live view
:
• Center-weighted or spot metering is selected (0 83).
• The camera is in mode M.
• The subject is too bright or too dark.
• Active D-Lighting is in effect (0 113).
• The photograph is a long time-exposure (0 52).
• The flash is used (0 119).