Nikon COOLPIXS1000PJ Manuale Utente

Inserting the Battery into the Camera

First Ste

p

s

Turn the camera off and be sure that the power-on 
lamp and the monitor have turned off before opening 
the battery-chamber/memory card slot cover.

To eject the battery, open the battery-chamber/ 
memory card slot cover and slide the orange battery 
latch in the direction indicated by the arrow (

1

). The 

battery can then be removed by hand (

2

).

• Note that the camera and battery may become hot 

during use; observe due caution when removing the 
battery.

To turn on the camera, press the power switch. The 
power-on lamp (green) will light for a moment and the 
monitor will turn on.

To turn off the camera, press the power switch again.

When the camera is turned off, both the power-on 
lamp and monitor will turn off.
• If the camera is turned off, hold down the 

c button to turn the camera on in 

playback mode (

C

If no operations are performed for about a minute (default setting), the monitor will turn off 
automatically and the camera will enter standby mode. If no operations are performed for another 
three minutes, the camera will turn off automatically (the auto off function).

Pressing the power switch, or the shutter-release button, while the monitor is off in standby mode 
(power-on lamp is blinking) will reactivate the monitor.

The time allowed to elapse before the camera enters standby mode can be changed from the 

off option (A 129) in the setup menu (A 117).