Nikon D3300/1855/R Manuale Utente

259

B The Setup Menu: Camera Setup

❚❚ Location Data

This item is used to adjust settings for optional GP-1 or GP-1A 
GPS units (

0 309). The unit can be connected to the camera’s 

accessory terminal (

0 309) using the cable supplied with the 

device, allowing information on the camera’s current position to 
be recorded when photographs are taken (turn the camera off 
before connecting the unit; for more information, see the 
manual provided with the device).

The Location data menu contains the options listed below.
• Standby timer: Choose whether the exposure meters turn off 

automatically when the unit is attached. 

• Position: This item is only available if a GP-1 or GP-1A is 

connected, when it displays the current latitude, longitude, 
altitude, and Coordinated Universal Time (UTC) as reported by 
the unit.

• Set clock from satellite: Choose Yes to set the camera clock based 

on the time provided by the satellite navigation system.

Exposure meters turn off automatically if no operations 
are performed for the time selected for Auto off timers > 
Standby timer in the setup menu (

0 245; to allow the 

camera time to acquire location data, the delay is 
extended by up to one minute after standby timer is 
activated or the camera is turned on). This reduces the 
drain on the battery.

Exposure meters do not turn off while the unit is 
connected.

A

UTC data is provided by the location data satellite system and is 
independent of the camera clock.