Nikon COOLPIXP600BK Manuale Utente
E
79
Re
fe
fe
ren
ce
S
e
ct
io
n
All images are hidden.
• There are no images available for a slide
show, etc.
• There are no images that can be displayed on
the image selection screen for deletion.
–
This image cannot be
deleted.
deleted.
The image is protected.
Disable protection.
Disable protection.
Raise the flash.
• When the scene mode is Scene auto
selector, you can take an image even if the
flash is lowered but the flash will not fire.
flash is lowered but the flash will not fire.
• When the scene mode is Night portrait or
Backlighting with HDR set to Off, you must
raise the flash to take an image.
raise the flash to take an image.
No access.
The camera could not receive the
communication signal from the smart device.
Select Connect to smart device in the Wi-Fi
options menu, and wirelessly connect the
camera and smart device again.
communication signal from the smart device.
Select Connect to smart device in the Wi-Fi
options menu, and wirelessly connect the
camera and smart device again.
Could not connect.
The camera failed to establish the connection
while receiving the communication signals from
the smart device. Select a different channel for
Channel in Options in the Wi-Fi options menu
and establish the wireless connection again.
while receiving the communication signals from
the smart device. Select a different channel for
Channel in Options in the Wi-Fi options menu
and establish the wireless connection again.
Wi-Fi connection
terminated.
terminated.
A cable was connected to the camera while the
camera and smart device were wirelessly
connected, the battery level became low, or the
connection was aborted due to poor
connectivity. Check the status of the camera and
establish the wireless connection again.
camera and smart device were wirelessly
connected, the battery level became low, or the
connection was aborted due to poor
connectivity. Check the status of the camera and
establish the wireless connection again.
Lens error
A lens error occurred.
Turn the camera off and then on again. If the
error persists, contact your retailer or Nikon-
authorized service representative.
Turn the camera off and then on again. If the
error persists, contact your retailer or Nikon-
authorized service representative.
Communications
error
error
An error occurred while communicating with
the printer.
Turn the camera off and reconnect the USB
cable.
the printer.
Turn the camera off and reconnect the USB
cable.
System error
An error occurred in the camera’s internal circuitry.
Turn the camera off, remove and reinsert the
battery, and turn the camera on. If the error
persists, contact your retailer or Nikon-
authorized service representative.
Turn the camera off, remove and reinsert the
battery, and turn the camera on. If the error
persists, contact your retailer or Nikon-
authorized service representative.
Display
Cause/Solution
A