Nikon J2 Manuale Utente

79

n

This section lists the error messages that appear in the display.

(Shutter-speed or 
aperture display flashes)

If the subject is too bright, lower ISO sensitiv-
ity or choose a faster shutter speed or smaller
aperture (higher f-number).
If the subject is too dark, raise ISO sensitivity,
use the built-in flash, or choose a slower
shutter speed or larger aperture (lower f-
number).

Keeping the zoom ring 
button pressed, rotate the 
zoom ring to extend the 
lens.

A lens with a retractable lens barrel button is
attached with the lens barrel retracted. Press
the retractable lens barrel button and rotate
the zoom ring to extend the lens.

Check lens. Pictures can 
only be taken when a lens 
is attached.

Attach a lens.

Start-up error. Turn the 
camera off and then on 
again.

Turn the camera off, remove and replace the
battery, and then turn the camera on.

The clock has been reset. Set the camera clock.

No memory card.

Turn the camera off and confirm that the
card is correctly inserted.

This memory card is not 
formatted. Format the 
memory card?

Select  Yes to format the card, or turn the
camera off and insert another memory card.

Memory card is locked 
(write protected).

Turn the camera off and slide the card write-
protect switch to the “write” position.

Memory card is full.

• You may be able to record additional

images if you reduce image quality or size.

• Delete unwanted images.
• Insert another memory card.

This memory card cannot 
be used. Card may be 
damaged; insert a 
different card.

• Use an approved card.
• Format the card (0 17).  If the problem per-

sists, the card may be damaged.  Contact a
Nikon-authorized service representative.

• Insert a new memory card.