Nikon 1797 Manuale Utente

After the set number of shots has been taken, rotate the
Main-Command Dial while pressing the ‚ button so z

disappears in the top and rear LCD panels to cancel Auto
Exposure/Flash Exposure Bracketing. The number of shots and
compensation value disappear when you remove your finger
from the ‚ button.
• The set number of shots and compensation value remain

unchanged after Auto Exposure/Flash Exposure Bracketing is
canceled.

• In Auto Exposure/Flash Exposure Bracketing, the shutter

speed and aperture in Programmed Auto, aperture in
Shutter-Priority Auto, shutter speed in Aperture-Priority
Auto and Manual exposure mode are varied. Flash output
level is varied in flash photography with dedicated Nikon
Speedlight.

• If exposure compensation function is also set, Bracketing

will be combined with the exposure compensation
values.

• Bracketing with varying flash output levels can be

performed at the buLb setting.

• If film reaches the end of the roll during shooting, rewind,

load a new roll and fully depress shutter release button to
advance film to frame 1, then fully depress shutter release
button again to resume operation.

• Bracketing is performed with one frame at a time when

the self-timer is set.

• Bracketing settings made on Multi-Control Back MF-28

have priority over settings on the F5 camera body.

• When a prolonged shutter speed (slower than 40 sec.) is

selected with a Custom Setting, shutter speed is not
varied in Bracketing.

• When flash sync speed is selected in Manual exposure

mode, shutter speed is not varied in Bracketing.

• When the Photo Secretary for F5 is used, Bracketing on

the camera body cannot be performed.
Perform Bracketing on the Photo Secretary for F5.

P400 (E) 02.12.27 6:42 PM Page 81